The latest Formula 1 news on drivers and teams, including up-to-date championship standings and the F1 calendar.
F1 News Other Computational fluid dynamics F1 aerodynamic development and regulations

Computational fluid dynamics F1 aerodynamic development and regulations

111
FIA Mohammed Ben Sulayem
Foto: © Depositphotos

Computational Fluid Dynamics, commonly known as CFD, stands as an indispensable simulation tool for Formula 1 teams globally. This advanced branch of engineering employs powerful software to simulate the behavior of fluids, such as air, around solid objects like an F1 car’s bodywork.

CFD allows for the creation of highly detailed virtual models and their subsequent analysis on a computer, providing critical insights into aerodynamic performance.

The increasing limitations imposed by the FIA on on-track testing and wind tunnel usage have elevated CFD to arguably the most important tool in modern F1 aerodynamic development. Teams rely on virtual simulation tools to explore hundreds of design variations with remarkable efficiency, a volume impossible to achieve through physical testing alone.

This digital approach saves both time and significant costs compared to fabricating physical parts and conducting extensive wind tunnel tests.

The mechanics of cfd simulation

The fundamental principle behind CFD involves dividing the air surrounding a vehicle into millions of small cells, then applying complex mathematical equations to predict the behavior within each cell. These equations account for various factors including air velocity, pressure, temperature, and turbulence.

By simulating these intricate interactions, engineers gain a detailed understanding of how air flows over different parts of the car and how this affects performance.

The CFD workflow typically begins with setting clear aerodynamic objectives, such as optimizing downforce and reducing drag. Engineers use Computer-Aided Design (CAD) software to create virtual models of components, which are then subjected to CFD simulations.

The software visualizes areas generating downforce, identifies regions of high and low pressure, and tracks complex flow features like tire wakes and vortices. This detailed analysis allows teams to refine designs virtually before committing to physical prototypes.

FIA aerodynamic testing restrictions and cfd

The FIA’s Aerodynamic Testing Restrictions (ATR) govern both wind tunnel and CFD usage in Formula 1, aiming to curb development costs and promote competitive balance. These regulations impose strict limits on the amount of computing resources and the number of new aerodynamic test geometries teams can utilize.

The allowance for both wind tunnel and CFD is adjusted based on a team’s position in the Constructors’ Championship, with the champion receiving the least and lower-ranked teams receiving more.

CFD computing allowance is measured in Mega Allocation Unit hours (MAUh), which considers the number of physical CPU cores used, the solver run time, and the processing frequency. Additionally, teams are restricted in the number of new three-dimensional aerodynamic test geometries (RATG) they can introduce during each testing period.

For instance, a reference allowance permits 2,000 RATG, with the champion receiving 1,400 and the lowest-ranked teams up to 2,300.

The FIA also enforces specific shutdown periods during which no wind tunnel or CFD simulations are permitted. A notable restriction was placed on the development of 2026 cars, with a ban on aerodynamic testing and CFD work from December 1, 2023, until January 1, 2025.

This measure was implemented to prevent teams from gaining an early advantage on the new technical regulations.

Championship Position Wind Tunnel Hours (Approximate) Restricted Aerodynamic Test Geometries (RATG) CFD Computing Allowance (MAUh Percentage)
1st (Champion) 224 (70%) 1,400 (70%) 70%
Mid-Table (Reference) 320 (100%) 2,000 (100%) 100%
10th or Lower / New Team 368 (115%) 2,300 (115%) 115%

Cfd and wind tunnel synergy: bridging the correlation gap

CFD and wind tunnel testing are complementary tools in Formula 1 aerodynamic development, rather than substitutes. CFD often serves as the initial port of call, allowing engineers to screen numerous design ideas quickly and cost-effectively.

Promising solutions identified through CFD are then advanced for verification in the wind tunnel, where physical models (typically 60% scale) are tested in a controlled environment.

Despite their combined power, a significant challenge known as the “correlation gap” exists between CFD simulations, wind tunnel data, and actual on-track performance. This discrepancy arises from differences between virtual models and real-world conditions, including tire deformation, suspension dynamics, and ground-effect variations that are difficult to perfectly replicate in simulations or scaled models.

Teams continuously work to bridge this gap by cross-checking data from all three sources.

Validation is a critical step, where on-track data from free practice sessions, collected using instrumentation like aero rakes and pressure sensors, is compared against wind tunnel and CFD predictions. A strong correlation builds confidence in the development tools, while a weak correlation necessitates investigation and recalibration of models or testing procedures.

Addressing a lost correlation loop can be one of the most expensive engineering exercises for an F1 team.

The future of cfd in F1: ai and evolving regulations

The landscape of CFD in Formula 1 is continuously evolving, with artificial intelligence (AI) playing an increasingly significant role in accelerating aerodynamic development. AI-driven models, trained on combined datasets from CFD, wind tunnels, and track data, are being used to refine future simulations and predict the performance of new designs in milliseconds.

This allows teams to explore non-intuitive geometries and compress development timelines, especially under stringent regulatory constraints.

Looking ahead, the FIA has outlined further regulatory changes that will impact CFD usage. Notably, from January 1, 2028, regulations will be introduced to allow the use of GPU cores for CFD simulations.

Currently, F1 regulations restrict solvers to homogeneous CPU processing units, which has limited the adoption of GPU acceleration seen in other industries. This upcoming change is expected to significantly enhance computational power and simulation capabilities for F1 teams.

Related Articles

Max Verstappen Red Bull Racing

The Red Bull ring an in-depth guide to austria’s Formula 1 circuit

The Red Bull Ring in Austria offers a unique Formula 1 challenge...

Adrian Newey Aston Martin

The role of aerodynamics in Formula 1 speed, downforce, and drag

Formula 1 aerodynamics are crucial for speed, grip, and stability. Teams balance...

Pirelli

The impact of rubber marbles on F1 racing and overtaking

Formula 1 drivers face significant grip loss off the racing line due...

FIA Mohammed Ben Sulayem

Formula 1 skid block rules and wooden plank wear measurement

Formula 1 cars feature a mandatory wooden plank, or skid block, under...