The latest Formula 1 news on drivers and teams, including up-to-date championship standings and the F1 calendar.
F1 News Other Formula 1 skid block rules and wooden plank wear measurement

Formula 1 skid block rules and wooden plank wear measurement

71
FIA Mohammed Ben Sulayem
Foto: © Depositphotos

Formula 1 cars are equipped with a mandatory component known as the skid block, often referred to as the plank, which is affixed to the underside of the car’s floor. This critical element serves to enforce a minimum ride height, thereby regulating the aerodynamic performance derived from the underfloor and ensuring driver safety.

The plank’s presence prevents teams from running their cars excessively low to the ground, which would otherwise generate extreme levels of downforce and potentially compromise stability and safety at high speeds.

The plank’s origin and safety imperative

The introduction of the plank in Formula 1 was a direct response to the tragic events of the 1994 San Marino Grand Prix, which saw the fatal accidents of Ayrton Senna and Roland Ratzenberger. Following these incidents, the FIA implemented a series of safety measures to curb the escalating speeds of the cars.

By mandating a physical wear-sensitive component under the car, officials gained an objective method to monitor and enforce minimum ride heights, preventing teams from exploiting ground effect aerodynamics to dangerous extremes.

Technical specifications and materials

The Formula 1 plank is a rectangular component fitted symmetrically along the central plane of the car’s underbody. When new, it must have a uniform thickness of 10 millimetres, with a tolerance of plus or minus 0.2 millimetres.

Historically, the plank was made from Jabroc, a high-density wood composite formed from layers of beechwood impregnated with resin. Modern Formula 1 planks are typically constructed from Permaglass, a glass-reinforced composite, chosen for its consistent wear characteristics and non-flammable properties.

Embedded within the plank are titanium alloy skid blocks, which are designed to make contact with the track surface before the plank itself. These titanium elements produce the spectacular sparks often seen trailing F1 cars, particularly during high-speed cornering or over bumps, while also helping to protect the plank from excessive wear.

Aerodynamic regulation and ride height control

The primary function of the plank is to act as a physical gauge for the car’s ride height, directly impacting the efficiency of its underfloor aerodynamics. Formula 1 cars extensively use Venturi tunnels and diffusers to create a low-pressure zone beneath the car, generating significant downforce.

Running the car as close to the ground as possible maximises this ground effect, sealing the airflow and enhancing downforce. The plank prevents teams from running their cars too low, which would lead to an unfair aerodynamic advantage and potentially dangerous instability.

Wear measurement and 2026 regulations

FIA technical regulations stipulate strict limits on the wear of the plank assembly. For the 2026 Formula 1 season, the plank must start at a nominal thickness of 10 millimetres, with a permissible wear down to a minimum of 8 millimetres after a session.

This allows for a maximum of 2 millimetres of wear over the course of a race or qualifying session. Scrutineers measure the plank’s thickness at three precisely placed holes using a micrometer, with the metal skids removed for accurate assessment.

A significant change for 2026 includes the mandatory use of a metal skid around the forward-most measurement hole, with metal skids remaining optional for the other two holes.

Component Specification Details
Plank Material (Modern F1) Permaglass composite Glass reinforced composite, homogeneous material with specific gravity 1.3-1.45
Skid Block Material Titanium alloy (Ti6Al4V) or 17-4PH stainless steel Embedded within the plank, mandatory at front hole for 2026
New Plank Thickness 10 mm ± 0.2 mm Uniform thickness when new
Minimum Plank Thickness (2026) 8 mm Measured at designated holes after a session
Permitted Plank Wear (2026) 2 mm Maximum allowed wear from new thickness
Plank Width 300 mm ± 2 mm Fixed symmetrically about the car’s centre line
Measurement Points (2026) 3 holes Precisely placed, measured with micrometer

Penalties for excessive wear

Any car found to have a plank worn beyond the permissible limit of 8 millimetres at any of the designated measurement points faces immediate disqualification from the session. This strict enforcement underscores the FIA’s commitment to fair play and safety.

Notable disqualifications for excessive plank wear have occurred throughout Formula 1 history, including Michael Schumacher at the 1994 Belgian Grand Prix, and more recently, Lewis Hamilton and Charles Leclerc at the 2023 United States Grand Prix.

These instances highlight how critical plank wear management is to race strategy and car setup, especially on bumpy circuits or those with aggressive kerbs.

Related Articles

Pirelli

The impact of rubber marbles on F1 racing and overtaking

Formula 1 drivers face significant grip loss off the racing line due...

FIA Mohammed Ben Sulayem

Formula 1 safety car rules and virtual safety car explained

Formula 1 safety car and virtual safety car procedures are crucial for...

FIA Mohammed Ben Sulayem

The racing apex in Formula 1 early versus late cornering

Formula 1 drivers master the racing apex, a critical point in corners,...

FIA Mohammed Ben Sulayem

Formula 1 session times schedule, qualifying and race start times

The 2027 Formula 1 calendar features 24 races and 10 sprint weekends,...